Any experimental courses offered by MAT E can be found at: registrar.iastate.edu/faculty-staff/courses/explistings/
Courses
Courses primarily for undergraduates:
Cr. R. F.
Prereq: Enrollment in Materials Science & Engineering Learning Community
Introduction to the Materials Science & Engineering Department and resources available to support student success.
Offered on a satisfactory-fail basis only.
(3-0) Cr. 3. F.S.
Prereq: MATH 165 AND (CHEM 177 or CHEM 167)
Introduction to the structure and properties of engineering materials. Structure of crystalline solids and imperfections. Atomic diffusion. Mechanical properties and failure of ductile and brittle materials. Dislocations and strengthening mechanisms. Phase equilibria, phase transformations, microstructure development, and heat treatment principles of common metallurgical systems including steels and aluminum alloys. Engineering applications.
Only one of Mat E 215, 273, or 392 may count toward graduation.
(3-0) Cr. 3. F.S.
Prereq: MAT E 215, MAT E 273 or MAT E 392; credit or enrollment in PHYS 222
Materials Engineering majors only. Fundamentals of ceramic, polymeric, and composite materials; degradation, electronic, thermal, magnetic, and optical properties of materials. Materials for energy, biomaterials, and nanomaterials.
(0-2) Cr. 1. F.S.
Prereq: Credit or enrollment in 216
Materials Engineering majors only. Laboratory exercise in materials.
(Cross-listed with ANTHR, ENV S, GLOBE, M E, SOC). (3-0) Cr. 3. F.S.
An introduction to understanding the key global issues in sustainability. Focuses on interconnected roles of energy, materials, human resources, economics, and technology in building and maintaining sustainable systems. Applications discussed will include challenges in both the developed and developing world and will examine the role of technology in a resource-constrained world.
Cannot be used for technical elective credit in any engineering department.
Meets International Perspectives Requirement.
(3-0) Cr. 3. F.S.
Prereq: CHEM 167 or CHEM 177; MATH 165
Introduction to the structure and properties of engineering materials. Structure of crystalline solids and imperfections. Atomic diffusion. Mechanical properties and failure of ductile and brittle materials. Dislocations and strengthening mechanisms. Phase equilibria, phase transformations, microstructure development, and heat treatment principles of common metallurgical systems including steels and aluminum alloys. Structure and mechanical properties of ceramic, polymeric and composite materials. Thermal properties of materials. Corrosion and degradation. Basic electronic properties of materials. Engineering applications.
Only one of Mat E 215, 273, or 392 may count toward graduation
Cr. R. S.
Prereq: Junior or senior classification in materials engineering
Preparation for a career in materials engineering or graduate school; experiential learning, resumes, interviewing, Myers-Briggs Type Indicator, leadership, international opportunities, professional ethics, graduate school preparation and opportunities, and alternative career paths (med school, law school, etc.).
Offered on a satisfactory-fail basis only.
(3-0) Cr. 3. F.S.
Prereq: CHEM 178, MAT E 216, and credit or enrollment in MATH 267
Basic laws of thermodynamics applied to phase equilibria, transformations, and reactions in multicomponent multiphase materials systems; thermodynamic descriptions of heterogeneous systems; binary and ternary phase diagrams; interfaces, surfaces, and defects.
(3-0) Cr. 3. F.S.
Prereq: MAT E 216, MAT E 311
Kinetic phenomena and phase equilibria relevant to the origins and stability of microstructure in metallic, ceramic and polymeric systems. Application of thermodynamics to the understanding of stable and metastable phase equilibria, interfaces and their effects on stability: defects and diffusion, empirical rate equations for transformation kinetics, driving forces and kinetics of nucleation, diffusional and diffusionless phase transformations.
(3-0) Cr. 3. F.
Prereq: MAT E 216 and PHYS 222
Materials Engineering majors only. Introduction to electronic properties of materials and their practical applications. Classical conduction models and electronic properties of metallic and ceramic materials. Elementary quantum mechanics and band theory of electron states in solids. Quantum theory of metallic conduction. Elementary semiconductor theory and devices. Polarization and dielectric properties of materials. Electron conduction in polymeric systems. Magnetic properties and applications of metals and ceramics.
Cr. 3. F.S.
Prereq: PHYS 221, credit or enrollment in MATH 166
Fundamentals of engineering mechanics as applied to materials. Forces and moments; stresses in loaded bodies; elasticity and stress analysis including stress / strain relationships; failure of materials including the mechanics of creep, fracture, and fatigue.
Only one of MAT E 319 or E M 324 may be used for graduation requirements.
(3-0) Cr. 3. F.
Prereq: MAT E 216
Ceramic crystal structures, defects, diffusion and transport. Phase equilibria and microstructures. Thermal, electronic, optical and magnetic properties of ceramics.
(2-3) Cr. 3. S.
Prereq: MAT E 214, MAT E 321
Synthesis and characterization of ceramic powders. Colloidal phenomena, rheology of suspensions, ceramic forming methods, and drying. High temperature ceramic reactions, liquid and solid-state sintering, grain growth, microstructure development. Processing/microstructure/property relationships.
(Cross-listed with E E). (3-0) Cr. 3. S.
Prereq: PHYS 222; MAT E majors: MAT E 317; CPR E and E E majors: E E 230
Introduction to semiconductor material and device physics. Quantum mechanics and band theory of semiconductors. Charge carrier distributions, generation/recombination, transport properties. Physical and electrical properties and fabrication of semiconductor devices such as MOSFETs, bipolar transistors, laser diodes and LED's.
(3-0) Cr. 3. Alt. S., offered odd-numbered years.
Prereq: MAT E 317
Electronic conduction in metals and the properties of conducting materials. Quantum mechanical behavior of free electrons and electrons in potentials wells, bonds and lattices. Development of the band theory of electron states in solids and the Free and Nearly Free Electron models. Density-of-states in energy bands and the Fermi-Dirac statistics of state occupancy. Quantum mechanical model of metallic conduction; Brillouin zones and Fermi surfaces. Additional topics include the thermal properties of metals, electron phase transitions in metallic alloys and the BCS theory of superconductivity. Classical and quantum mechanical treatment of the origins of magnetism in materials; orbital and spin angular momentum. Theory of magnetic behavior in dia-, para-magnetic, ferromagnetic materials.
(2-2) Cr. 3. F.
Prereq: MAT E 214 and either MAT E 215, 273 or 392
Theory and practice of metal processing, including casting; powder metallurgy; additive manufacturing; rolling; forging; extrusion; drawing; material removal; joining; surface modification; and heat treatment. Use of processing software.
(3-0) Cr. 3. S.
Prereq: MAT E 215 or 273 or 392
Processing of metals and alloys to obtain desired mechanical properties by manipulation of their microstructure and composition of constituent phase(s). Relevance of defects to mechanical properties, plastic flow. Strengthening mechanisms in metals and alloys. Microstructure, heat treatment and mechanical properties of engineering alloys. Metal-matrix composites.
(3-0) Cr. 3. S.
Prereq: MAT E 216
Fundamental concepts of soft matter, including polymer, colloid and surfactant. Their physical and chemical properties, rheology and production methods. Applications of polymers in the chemical industry. Related topics in surface, diffusion and stability.
(3-0) Cr. 3. F.S.
Prereq: MAT E 216
Introduction to polymeric materials, synthesis, structure and properties. Relationship between polymer composition, processing and properties.
(Cross-listed with E M). (3-0) Cr. 3. S.
Prereq: PHYS 112 or PHYS 222
Radiography, ultrasonic testing, magnetic particle inspection, eddy current testing, dye penetrant inspection, and other techniques. Physical bases of tests, materials to which applicable, types of defects detectable, calibration standards, and reliability safety precautions.
(Cross-listed with E M). (0-3) Cr. 1. S.
Prereq: Credit or enrollment in MAT E 362
Application of nondestructive testing techniques to the detection and sizing of flaws in materials and to the characterization of material's microstructure. Included are experiments in hardness, dye penetrant, magnetic particle, x-ray, ultrasonic and eddy current testing. Field trips to industrial laboratories.
(3-0) Cr. 3. S.
Introduction to the historical role of women as related to US industry, family and community with emphasis on the years 1830 - 1945, but also related to the current climate. Topics completed in 392 with arranged lectures at Brunel University. Orientation for Brunel summer study program.
Offered on a satisfactory-fail basis only. Credit for graduation allowable only upon completion of Mat E 392.
Meets U.S. Diversity Requirement
(3-0) Cr. 3. SS.
Prereq: MAT E 391, MATH 165, CHEM 167 or CHEM 177
Introduction to the structure and properties of engineering materials. Structure of crystalline solids and imperfections. Atomic diffusion. Mechanical properties and failure of ductile and brittle materials. Dislocations and strengthening mechanisms. Phase equilibria, phase transformations, microstructure development, and heat treatment principles of common metallurgical systems including steels and aluminum alloys. Structure and mechanical properties of ceramic, polymeric and composite materials. Thermal properties of materials. Corrosion and degradation. Basic electronic properties of materials. Engineering applications.
Only one of MAT E 215, 273, or 392 may count toward graduation.
Meets International Perspectives Requirement.
Cr. R. Repeatable. SS.
Prereq: Permission of department and Engineering Career Services
Professional work period of at least 10 weeks during the summer. Students must register for this course prior to commencing work.
Offered on a satisfactory-fail basis only.
Cr. R. Repeatable. F.S.
Prereq: Permission of department and Engineering Career Services
Professional work period. One semester per academic or calendar year. Students must register for this course before commencing work.
Offered on a satisfactory-fail basis only.
(2-2) Cr. 3. F.S.
Prereq: Senior Classification: MAT E 413-414 sequence is intended for students in their final two semesters before graduation.
Fundamentals of materials engineering design, information sources, team behavior, professional preparation, quantitative design including finite-element analysis and computer aided design, materials selection, informatics and combinatorial methods. Analysis of design problems, development of solutions, selected case studies. Oral presentation skills. Preparations for spring project.
(2-2) Cr. 3. F.S.
Prereq: MAT E 413
Integration of materials processing, structure/composition, properties and performance principles in materials engineering problems. Multi-scale design of materials, materials processing, case studies including cost analysis, ethics, risk and safety. Team projects specified by either industry or academic partners. Written and oral final project reports.
(Dual-listed with M S E 519). (Cross-listed with E E). (3-0) Cr. 3. F.
Prereq: E E 311 or MAT E 317 or PHYS 364
Magnetic fields, flux density and magnetization. Magnetic materials, magnetic measurements. Magnetic properties of materials. Domains, domain walls, domain processes, magnetization curves and hysteresis. Types of magnetic order, magnetic phases and critical phenomena. Magnetic moments of electrons, theory of electron magnetism. Technological application, soft magnetic materials for electromagnets, hard magnetic materials, permanent magnets, magnetic recording technology, magnetic measurements of properties for materials evaluation.
(2-3) Cr. 3. F.
Prereq: MAT E 214, MAT E 321
Composition, structure, properties manufacturing, and applications of inorganic glasses. Mechanical, structural, thermal, optical, ionic, electronic, and biological applications of inorganic glasses, especially silicate glasses. Contemporary topics in glass science and engineering such as glass optical fiber communication and flat panel display technologies. Laboratory exercises in the preparation and characterization of silicate glasses.
(Dual-listed with M S E 532). (Cross-listed with E E). (2-4) Cr. 4.
Prereq: credit or enrollment in E E 332
Techniques used in modern integrated circuit fabrication, including diffusion, oxidation, ion implantation, lithography, evaporation, sputtering, chemical-vapor deposition, and etching. Process integration. Process evaluation and final device testing. Extensive laboratory exercises utilizing fabrication methods to build electronic devices. Use of computer simulation tools for predicting processing outcomes. Recent advances in processing CMOS ICs and micro-electro-mechanical systems (MEMS).
(2-3) Cr. 3. S.
Prereq: MAT E 317, MAT E 321
Charged point defects and formation equations. Non-stoichiometric conductors, dielectric, ferroelectric, and piezoelectric materials and applications. Optical properties, optical spectra of materials, optoelectronic devices. Magnetic and superconducting materials. Contemporary topics in advanced ceramics.
(Dual-listed with M S E 537). (Cross-listed with E E). Cr. 3. S.
Prereq: E E 332 or MAT E 317 or PHYS 322
Review of classical and quantum mechanical descriptions of electrons in solids, band theory, metallic conduction, lattice vibrations, semiconductors, semiconductor devices, dielectrics, polarization, dielectric relaxation, crystal anisotropy, ferroelectricity, piezoelectricity, superconductivity, magnetism, device applications.
(2-3) Cr. 3. F.
Prereq: credit or enrollment in 314
Production and processing of ferrous metals. Extraction of pig iron from ore. Steelmaking processes. Equilibrium and nonequilibrium phases in the Fe-C system. Properties and processing of cast irons, plain carbon and alloy steels, stainless and specialty steels. Transformation diagrams, hardenability, and surface treatments. Continuous casting, forging, hot rolling, quenching, and tempering as they apply to ferrous materials. Cost and mechanical performance considerations in cast iron and steel selection and heat treatment.
(2-2) Cr. 3. S.
Prereq: MAT E 214, 215 or 273 or 392
Corrosion and corrosion control of metallic systems. Corrosion fundamentals, classification of different types of metallic corrosion, corrosion properties of various engineering alloys, corrosion control. Failure analysis. Characteristics of common types of metallic failures, case studies of failures, designing to reduce failure risk.
(2-3) Cr. 3. F.
Prereq: MAT E 214, MAT E 351
Overview of polymer chemical composition, microstructure, thermal and mechanical properties, rheology, and principles of polymer materials selection. Intensive laboratory experiments include chemical composition studies, microstructural characterization, thermal analysis, and mechanical testing.
(Dual-listed with M S E 554). (3-0) Cr. 3. S.
Prereq: MAT E 351
Basic concepts in polymer composites, blends, and block copolymers. Phase separation and miscibility, microstructures and mechanical behavior. Fiber reinforced and laminated composites. Viscosity, rheology, viscoelasticity of polymers. Polymer melt processing methods such as injection molding and extrusion; selection of suitable processing methods and their applications.
(Dual-listed with M S E 556). (Cross-listed with B M E). (3-0) Cr. 3. F.
Prereq: CHEM 178 and MAT E 216 or MAT E 273 or MAT E 392
Presentation of the basic chemical and physical properties of biomaterials, including metals, ceramics, and polymers, as they are related to their manipulation by the engineer for incorporation into living systems. Role of microstructure properties in the choice of biomaterials and design of artificial organs, implants, and prostheses.
(Dual-listed with M S E 557). (3-0) Cr. 3. Alt. S., offered even-numbered years.
Prereq: MAT E 311 or CHEM 325
Electronic configuration, valence states, minerals, ores, beneficiation, extraction, separation, metal preparation and purification. Crystal structures, phase transformations and polymorphism, and thermochemical properties of rare earth metals. Chemical properties: inorganic and organometallic compounds, alloy chemistry, nature of the chemical bonding. Physical properties: mechanical and elastic properties, magnetic properties, resistivity, and superconductivity.
(Cross-listed with A B E, AER E, B M E, CPR E, E E, ENGR, I E, M E). (1-4) Cr. 3. Repeatable. F.S.
Prereq: Student must be within two semesters of graduation; permission of instructor.
Application of team design concepts to projects of a multidisciplinary nature. Concurrent treatment of design, manufacturing, and life cycle considerations. Application of design tools such as CAD, CAM, and FEM. Design methodologies, project scheduling, cost estimating, quality control, manufacturing processes. Development of a prototype and appropriate documentation in the form of written reports, oral presentations and computer models and engineering drawings.
(Cross-listed with AER E, CPR E, E E, ENGR, I E, M E). (1-4) Cr. 3. Repeatable, maximum of 2 times. Alt. F., offered irregularly.Alt. S., offered irregularly.
Prereq: Student must be within two semesters of graduation or receive permission of instructor.
Build and test of a conceptual design. Detail design, manufacturability, test criteria and procedures. Application of design tools such as CAD and CAM and manufacturing techniques such as rapid prototyping. Development and testing of a full-scale prototype with appropriate documentation in the form of design journals, written reports, oral presentations and computer models and engineering drawings.
(Dual-listed with M S E 581). (3-0) Cr. 3. Alt. F., offered odd-numbered years.
Prereq: MATH 265 and MAT E 311 or CH E 381 or CHEM 325 or PHYS 304
Introduction to the basic methods used in the computational modeling and simulation of materials, from atomistic simulations to methods at the mesoscale. Students will be expected to develop and run sample programs. Topics to be covered include, for example, electronic structure calculations, molecular dynamics, Monte Carlo, phase-field methods, etc.
(Dual-listed with M S E 588). (Cross-listed with E E). (3-0) Cr. 3. Alt. F., offered odd-numbered years.
Prereq: MATH 265 and (MAT E 216 or MAT E 273 or MAT E 392 or E E 311 or PHYS 364)
Electromagnetic fields of various eddy current probes. Probe field interaction with conductors, cracks and other material defects. Ferromagnetic materials. Layered conductors. Elementary inversion of probe signals to characterize defects. Special techniques including remote-field, transient, potential drop nondestructive evaluation and the use of Hall sensors. Practical assignments using a 'virtual' eddy current instrument will demonstrate key concepts.
Cr. arr. Repeatable.
Investigation of individual research or special topics.
Cr. arr. Repeatable. F.S.SS.
Prereq: permission of department
Independent study that is being proposed to be used toward graduation or minor requirements as a technical elective. This requires a proposal to the department's Curriculum Committee before the semester starts.
Cr. arr. F.S.SS.
Prereq: permission of department
Independent study that is being proposed to be used for a Senior Honors Project (2 credits) and possibly for extra credits toward graduation or minor requirements. This requires a proposal to the department's Curriculum Committee before the semester starts.
Cr. arr. Repeatable. F.S.SS.
Prereq: permission of department
Independent study that is being proposed to gain research experience. This requires a proposal to the department's Curriculum Committee before the semester starts.
Credits can only be used by Mat E majors toward graduation as a free elective.