your adventure in

Electrical Engineering

This is an archived copy of the 2017-2018 catalog. To access the most recent version of the catalog, please visit http://catalog.iastate.edu.

View PDF

For the undergraduate curriculum in electrical engineering leading to the degree Bachelor of Science. This curriculum is accredited by the Engineering Accreditation Commission of ABET, http://www.abet.org.

The Department of Electrical and Computer Engineering (ECpE) at Iowa State University provides undergraduate students with the opportunity to learn electrical and computer engineering fundamentals, study applications of the most recent advances in state-of-the-art technologies, and prepare for the practice of electrical engineering. The student-faculty interaction necessary to realize this opportunity occurs within an environment that is motivated by the principle that excellence in undergraduate education is enhanced by an integrated commitment to successful, long-term research and outreach programs.

The electrical engineering curriculum offers a number of emphasis areas at the undergraduate level, including control systems, electromagnetics and nondestructive evaluation, microelectronics and photonics, VLSI, electric power and energy systems, and communications and signal processing. Students are required to choose at least one course sequence that focuses on one of these areas; therefore graduates have substantial depth in specific areas to complement the breadth obtained in the required curriculum. Students also may take elective courses in computer networking, security, computer architecture, digital systems, and software.

The program objectives for the electrical engineering program describe accomplishments that graduates are expected to attain within five years after graduation. Graduates will have applied their expertise to contemporary problem solving, be engaged professionally, have continued to learn and adapt, and have contributed to their organizations through leadership and teamwork. More specifically, the objectives for expertise, engagement, learning, leadership and teamwork are defined below for each program.

The objectives of the electrical engineering program at ISU are:

  • Graduates, within five years of graduation, should demonstrate peer-recognized expertise together with the ability to articulate that expertise and use it for contemporary problem solving in the analysis, design, and evaluation of electrical and electronic devices and systems.
  • Graduates, within five years of graduation, should demonstrate engagement in the engineering profession, locally and globally, by contributing to the ethical, competent, and creative practice of engineering or other professional careers.
  • Graduates, within five years of graduation, should demonstrate sustained learning and adapting to a constantly changing field through graduate work, professional development, and self study.
  • Graduates, within five years of graduation, should demonstrate leadership and initiative to ethically advance professional and organizational goals, facilitate the achievements of others, and obtain substantive results.
  • Graduates, within five years of graduation, should demonstrate a commitment to teamwork while working with others of diverse cultural and interdisciplinary backgrounds.

As a complement to the instructional activity, the ECpE department provides opportunities for each student to have experience with broadening activities. Through the cooperative education and internship program, students have the opportunity to gain practical industry experience.

Students have the opportunity to participate in advanced research activities, and through international exchange programs, students learn about engineering practices in other parts of the world. Well-qualified juniors and seniors in electrical engineering who are interested in graduate study may apply for concurrent enrollment in the Graduate College to simultaneously pursue both the Bachelor of Science and Master of Science, the Bachelor of Science and Master of Business Administration, or the Bachelor of Science and Master of Engineering degrees.

Students are required to prepare and to maintain a portfolio of their technical and non-technical skills. This portfolio is evaluated for student preparation during the student’s curriculum planning process. Results of the evaluation are used to advise students of core strengths and weaknesses.

Courses for students who are not in the electrical engineering program: E E 442 Introduction to Circuits and Instruments, E E 448 Introduction to AC Circuits and Motors. Credit in these courses may not be counted toward a degree in either electrical engineering or computer engineering.

Curriculum in Electrical Engineering

Administered by the Department of Electrical and Computer Engineering.

Leading to the degree Bachelor of Science.

Total credits required: 128.  Any transfer credit courses applied to the degree program require a grade of C or better (but will not be calculated into the ISU cumulative GPA, Basic Program GPA or Core GPA). See also Basic Program and Special Programs. 
Note: Department does not allow Pass/Not Pass credits to be used to meet graduation requirements.
International Perspectives: 3 cr.1
U.S. Diversity: 3 cr.1
Communication Proficiency/Library requirement:
ENGL 150Critical Thinking and Communication (C or better in this course)3
ENGL 250Written, Oral, Visual, and Electronic Composition (C or better in this course)3
LIB 160Information Literacy1
One of the following:3
Technical Communication (C or better in this course)
Proposal and Report Writing (C or better in this course)
General Education Electives: 15 cr.3

Complete minimum of 6 cr. from Approved General Education Component at 300 or higher level. Complete additional 9 cr. from Approved General Education Component.

Basic Program: 27 cr.
A minimum GPA of 2.00 required for this set of courses, including any transfer courses (please note that transfer course grades will not be calculated into the Basic Program GPA). See Requirement for Entry into Professional Program in College of Engineering Overview section.
CHEM 167General Chemistry for Engineering Students4
or CHEM 177 General Chemistry I
ENGL 150Critical Thinking and Communication3
ENGL 250Written, Oral, Visual, and Electronic Composition3
ENGR 101Engineering OrientationR
E E 185Introduction to Electrical Engineering and Problem-Solving I 23
LIB 160Information Literacy1
MATH 165Calculus I4
MATH 166Calculus II4
PHYS 221Introduction to Classical Physics I5
Total Credits27
Math and Physical Science: 16 cr.
MATH 265Calculus III4
MATH 267Elementary Differential Equations and Laplace Transforms4
MATH 207Matrices and Linear Algebra3
PHYS 222Introduction to Classical Physics II5
Total Credits16
Electrical Engineering Core: 41 cr.
(A minimum GPA of 2.00 required for this set of courses, including any transfer courses; please note that transfer course grades will not be calculated into the Core GPA).
E E 285Problem Solving Methods and Tools for Electrical Engineering4
CPR E 281Digital Logic4
CPR E 288Embedded Systems I: Introduction4
E E 201Electric Circuits4
E E 230Electronic Circuits and Systems4
E E 224Signals and Systems I4
E E 303Energy Systems and Power Electronics3
E E 311Electromagnetic Fields and Waves4
E E 322Probabilistic Methods for Electrical Engineers3
Core Elective: one of the following:7
Communication Systems I
Signals and Systems II
Core Elective: one of the following:
Integrated Electronics
Semiconductor Materials and Devices
Total Credits41

Note: E E 321 and E E 332 are 3-credit courses, whereas E E 324 and E E 330 are 4-credit courses. The core credit requirement (41 credits) assumes 7 credits taken for these options. Any core credit surplus or deficiency can be used as credits for E E technical electives.  

Other Remaining Courses: 29 cr.
E E 491Senior Design Project I and Professionalism3
E E 492Senior Design Project II2
I E 305Engineering Economic Analysis3
One of the following:3
Proposal and Report Writing (C or better in this course)
Technical Communication (C or better in this course)
E E/Cpr E Technical Electives including one approved sequence 312
Elective from Math, E E, Cpr E and/or non-E E/Cpr E 36
Total Credits29
Seminar/Co-op/Internships:
E E 166Professional Programs OrientationR
E E 294Program DiscoveryR
E E 394Program ExplorationR
E E 494Portfolio AssessmentR
Co-op or internship is optional

Outcomes Assessment - Students are required to prepare and to maintain a portfolio of their technical and non-technical skills. This portfolio is evaluated for student preparation during the student's curriculum planning process. Results of the evaluation are used to advise students of core strengths and weaknesses.

Transfer Credit Requirements

The degree program must include a minimum of 30 credits at the 300-level or above in professional and technical courses earned at ISU in order to receive a B.S. in electrical engineering. These 30 credits must include E E 491 Senior Design Project I and Professionalism, E E 492 Senior Design Project II, and credits in the core professional curriculum and/or in technical electives. The Electrical and Computer Engineering Department requires a grade of C or better for any transfer credit course that is applied to the degree program.

  1. These university requirements will add to the minimum credits of the program unless the university-approved courses are also approved by the department to meet other course requirements within the degree program. U.S. diversity and international perspectives courses may not be taken Pass/Not Pass.
  2. See Basic Program for Professional Engineering Curricula for accepted substitutions for curriculum designated courses in the Basic Program.
  3. From department approved lists

See also: A 4-year plan of study grid showing course template by semester.

Note: International perspectives and U.S. diversity courses are used to meet the general education electives.

Electrical Engineering, B.S.

First Year
FallCreditsSpringCredits
ENGR 1010MATH 1664
E E 1853PHYS 2215
MATH 1654E E 2854
CHEM 1674E E 1660
ENGL 1503General Education Elective3
LIB 1601 
 15 16
Second Year
FallCreditsSpringCredits
E E 2014CPR E 2814
PHYS 2225E E 2304
E E 2940E E 2244
MATH 2674MATH 2654
ENGL 2503 
 16 16
Third Year
FallCreditsSpringCredits
CPR E 2884EE 330 or EE 3323-4
E E 3033EE 321 or EE 3243-4
E E 3114E E 3223
MATH 2073ENGL 3143
E E 3940General Education Elective3
General Education Elective3 
 17 15-17
Fourth Year
FallCreditsSpringCredits
E E 4913E E 4922
E E 4940Technical Electives9
I E 3053General Education Electives6
Technical Electives9 
 15 17

Actual Total Credits: 128

Graduate Study

The department offers work for the degrees Master of Engineering, Master of Science, and Doctor of Philosophy with a major in electrical engineering and minor work to students with other majors. Minor work for electrical engineering majors is usually selected from a wide range of courses outside electrical engineering.

Master of Engineering degree is coursework only. It is recommended for off-campus students.

The degree Master of Science with thesis is recommended for students who intend to continue toward the Doctor of Philosophy degree or to undertake a career in research and development. The non-thesis Master of Science degree requires a creative component.

The department also offers a graduate certificate program in power systems engineering. 

The normal prerequisite to major in graduate work in electrical engineering is the completion of undergraduate work substantially equivalent to that required of electrical engineering students at this university. Because of the diversification in the electrical engineering graduate program, however, it is possible for a student to qualify for graduate study in certain areas of electrical engineering even though the student’s undergraduate or prior graduate training has been in a discipline other than electrical engineering. Supporting work, if required, will depend on the student’s background and area of research interest. Prospective students from a discipline other than electrical engineering are required to submit, with the application for admission, a statement of the proposed area of graduate study.

The department requires submission of GRE General test scores by applicants. All students whose first language is not English and who have no U.S. degree must submit TOEFL examination scores. Students pursuing the Doctor of Philosophy must complete the department qualifying process.

The Department of Electrical and Computer Engineering is a participating department in the interdepartmental graduate minor in complex adaptive systems. Students interested in this program should see the Complex Adaptive Systems section of the catalog for requirements.

The Department of Electrical and Computer Engineering is a participating department in the interdepartmental Master of Science and Doctor of Philosophy degree programs in bioinformatics and computational biology. Students interested in these programs may earn their degrees while working under an adviser in electrical and computer engineering.

Well-qualified juniors or seniors in electrical engineering who are interested in graduate study may apply for concurrent enrollment in the Graduate College to simultaneously pursue both the Bachelor of Science and Master of Science degrees, the Bachelor of Science and Master of Business Administration, or the Bachelor of Science and Master of Engineering degrees. Under concurrent enrollment, students are eligible for assistantships and simultaneously take undergraduate and graduate courses. Details are available in the Student Services Office and on the department’s website.

Expand all courses

Courses

Courses primarily for undergraduates:

(Cross-listed with CPR E). Cr. R. F.S.


(1-0) Overview of the nature and scope of electrical engineering and computer engineering professions. Overview of portfolios. Departmental rules, advising center operations, degree requirements, program of study planning, career options, and student organizations.

(2-2) Cr. 3. F.S.

Prereq: MATH 143 or satisfactory scores on mathematics placement examinations; credit or enrollment in MATH 165
Project based examples from electrical engineering. Systematic thinking process for engineering problem solving. Group problem solving. Mathematical, conceptual and computer based projects. Solving engineering problems and presenting solutions through technical reports and oral presentations. Solutions of engineering problems using computation tools and basic programming.

(0-2) Cr. 1. S.

Prereq: E E 185
Project based and hands on continuation of 185. Group skills needed to work effectively in teams. Individual interactive skills for small and large groups. Learning to use tools and methods for solving electrical engineering problems.

(1-3) Cr. 2.

Prereq: E E 185 or equivalent
Fundamental laboratory based course in bio-electrical engineering with an emphasis on acquiring and analyzing biomedical signals to obtain relevant information. Topics covered include an overview of basic medical terminology and anatomy, labs illustrating data acquisition from different body systems, and an introduction to statistical significance and its relationship to biological variability.

(3-3) Cr. 4. F.S.

Prereq: Credit or enrollment in MATH 267 and PHYS 222
Emphasis on mathematical tools. Circuit elements (resistors, inductors, capacitors) and analysis methods including power and energy relationships. Network theorems. DC, sinusoidal steady-state, and transient analysis. AC power. Frequency response. Two port models. Diodes, PSPICE. Laboratory instrumentation and experimentation. Credit for only E E 201 or 442 may be used towards graduation.

(3-3) Cr. 4. F.S.

Prereq: E E 201, MATH 267, PHYS 222
Mathematical preliminaries. Introduction to signals and systems. Signal manipulations. System properties. LTI systems, impulse response and convolution. Fourier Series representation and properties. Continuous and discrete-time Fourier Transforms and properties. Sampling and reconstruction. Modulation and demodulation. Applications and demonstrations using Matlab.

(3-3) Cr. 4. F.S.

Prereq: E E 201, MATH 267, PHYS 222
Frequency domain characterization of electronic circuits and systems, transfer functions, sinusoidal steady state response. Time domain models of linear and nonlinear electronic circuits, linearization, small signal analysis. Stability and feedback circuits. Operational amplifiers, device models, linear and nonlinear applications, transfer function realizations. A/D and D/A converters, sources of distortions, converter linearity and spectral characterization, applications. Design and laboratory instrumentation and measurements.

(Cross-listed with CPR E). Cr. R.


Introduction to the College of Engineering and the engineering profession specifically for transfer students. Information concerning university and college policies, procedures, and resources. Offered on a satisfactory-fail basis only.

(3-3) Cr. 4.


Integration of field-specific computational tools for practically solving electrical engineering problems. Methods for systematically reducing problems into sequential steps compatible with computer based tools. Structuring computer programs for efficiency and maintainability. Integration of multi-platform operating systems and multi-vendor tools for solving engineering problems. Hands-on laboratory experiences using Matlab, C, and other computational tools.

(Cross-listed with CPR E). Cr. R.

Prereq: CPR E 166 or E E 166
The roles of professionals in computer and electrical engineering. Relationship of coursework to industry and academic careers. Issues relevant to today's world. Offered on a satisfactory-fail basis only.

(3-0) Cr. 3. F.S.

Prereq: MATH 267, PHYS 222; credit or enrollment in E E 224 and E E 230
Structure of competitive electric energy systems. System operation and economic optimization. Mutual inductance, transformers. Synchronous generators. Balanced three-phase circuit analysis and power calculations. Network calculations and associated numerical algorithms. Two-port circuits. Voltage regulation. Resonance and power factor correction. DC and induction motors. Power electronic circuit applications to power supplies and motor drives.

(4-0) Cr. 4. F.S.

Prereq: E E 201, MATH 265, PHYS 222, credit or enrollment in MATH 267
Fundamentals and applications of electric and magnetic fields and materials. Electrostatics and magentostatics, potentials, capacitance and inductance, energy, force, torque. Uniform plane electromagnetic waves, Poynting vector. Transmission lines: transient and sinusoidal steady-state conditions, reflection coefficient.

(3-0) Cr. 3.

Prereq: PHYS 222, PHYS 112, or equivalent
Conceptual study of electomagnetism and its application in engineering and related fields. EM fundamentals, EM spectrum, radiation, radiating systems, wireless, modern concepts of physics, quantum computing, transmission lines, high speed effects, waveguides, GPS and other related phenomena will be discussed and explained with the application in mind.

(3-0) Cr. 3. F.

Prereq: E E 224
Frequency domain analysis, spectral filtering, bandwidth. Linear modulation systems. Angle modulation systems. Phase locked loop, super-heterodyne receiver. Sampling and pulse code modulation. Digital data transmission, line coding, pulse shaping, multiplexing.

(Cross-listed with STAT). (3-0) Cr. 3. F.S.

Prereq: E E 224
Introduction to probability with applications to electrical engineers. Sets and events, probability space, conditional probability, total probability and Bayes' rule. Discrete and continuous random variables, cumulative distribution function, probability mass and density functions, expectation, moments, moment generating function, multiple random variables, functions of random variables. Elements of statistics, hypothesis testing, confidence intervals, least squares. Introduction to random processes.

(3-3) Cr. 4. F.S.

Prereq: E E 224
Laplace and z-Transforms, properties and inverses. Applications to LTI systems and analog/digital filters. Feedback systems and stability. State-space representation and analysis.

(Cross-listed with CPR E). (3-3) Cr. 4.

Prereq: E E 201, credit or enrollment in E E 230, CPR E 281
Semiconductor technology for integrated circuits. Modeling of integrated devices including diodes, BJTs, and MOSFETs. Physical layout. Circuit simulation. Digital building blocks and digital circuit synthesis. Analysis and design of analog building blocks. Laboratory exercises and design projects with CAD tools and standard cells.

(Cross-listed with MAT E). (3-0) Cr. 3. S.

Prereq: PHYS 222; MAT E majors: MAT E 317; CPR E and E E majors: E E 230
Introduction to semiconductor material and device physics. Quantum mechanics and band theory of semiconductors. Charge carrier distributions, generation/recombination, transport properties. Physical and electrical properties and fabrication of semiconductor devices such as MOSFETs, bipolar transistors, laser diodes and LED's.

(3-3) Cr. 4. F.

Prereq: E E 230, credit or enrollment in CPR E 288
Further topics in electronic systems design: Use of sensors and actuators. High-power amplifying and switching components. Linear and switched-mode power supplies. Linear and switched-mode amplifiers. Interfacing electronic components with programmable microcontrollers. Printed circuit board technology and design tools. Laboratory exercises and design projects incorporating printed circuit technology.

(2-2) Cr. 3.

Prereq: E E 188, E E 224, E E 230
Principles and practices of biomedical instrumentation. Topics include: the physics and measurement of biopotentials including electrocardiography (EKG), electromyohgraphy (EMG) and electro-occulography (EOG), mechanical and chemical sensors, amplifiers and filters, recording and processing biological signals from nerve cells, muscles and human body, electrode polarization, surface electrodes, power line interference, heart sound sensors, respiratory gas concentration, blood-gas sensors, noninvasive blood-gas sensors.

(3-0) Cr. 3.

Prereq: PHYS 222
Energy-scientific, engineering and economic foundations. Energy utilization-global and national. Sectoral analysis of energy consumption. Relationship of energy consumption and production to economic growth and environment. Technology for energy production. Economic evaluation of energy utilization and production. Scientific basis for global warming. Environmental impact of energy production and utilization. Renewable energy.
Meets International Perspectives Requirement.

(Cross-listed with A B E, C E). (2-2) Cr. 3. F.

Prereq: Junior classification in engineering
Multi-disciplinary approach to sustainable engineering and international development, sustainable development, appropriate design and engineering, feasibility analysis, international aid, business development, philosophy and politics of technology, and ethics in engineering. Engineering-based projects from problem formulation through implementation. Interactions with partner community organizations or international partners such as nongovernment organizations (NGOs). Course readings, final project/design report.
Meets International Perspectives Requirement.

(2-2) Cr. 2.

Prereq: E E 224
Studio-based activity (guided problem-based learning and design) focusing on elements of design, measurement, data capture, and data interpretation. Team building, engineering professionalism, engineering process of review and critique, and presentation. Open design activities that may include working with other studios.

(Cross-listed with CPR E). Cr. R.

Prereq: CPR E 294 or E E 294
Exploration of academic and career fields for electrical and computer engineers. Examination of professionalism in the context of engineering and technology with competencies based skills. Introduction to professional portfolio development and construction. Offered on a satisfactory-fail basis only.

Cr. R. Repeatable. SS.

Prereq: Permission of department and Engineering Career Services
Professional work period of at least 10 weeks during the summer. Students must register for this course prior to commencing work. Offered on a satisfactory-fail basis only.

Cr. R. Repeatable. F.S.

Prereq: Permission of department and Engineering Career Services
Professional work period. One semester per academic or calendar year. Students must register for this course before commencing work. Offered on a satisfactory-fail basis only.

(Dual-listed with E E 514). (3-3) Cr. 4. F.

Prereq: E E 230, E E 311
Principles, analyses, and instrumentation used in the microwave portion of the electromagnetic spectrum. Wave theory in relation to circuit parameters. S parameters, couplers, discontinuities, and microwave device equivalent circuits. RF amplifier design, microwave sources, optimum noise figure and maximum power designs. Microwave filters and oscillators.

(Dual-listed with E E 517). (3-3) Cr. 4. S.

Prereq: E E 311
Fundamental antenna concepts. Radiation from wire-and aperture-type sources. Radio transmission formulas. Wave and antenna polarization. Antenna arrays. Modern antenna topics. Practical antenna design. Antenna noise. Radiowave propagation in the presence of the earth and its atmosphere. Antenna measurements and computer aided analysis.

(Cross-listed with CPR E). (3-2) Cr. 4. F.

Prereq: E E 230 and E E 311
Measurement of high speed systems and mixed signal systems. Measurement accuracy and error. Network analysis and spectrum analysis used in high speed measurement and testing. Test specification process and parametric measurement. Sampling and digital signal processing concepts. Design for testability. Testing equipment. Applications.

(3-0) Cr. 3.

Prereq: E E 321 and enrollment in E E 423
Introduction to probability and random processes; Performance of analog systems with noise; Performance of digital communication with noise; optimum receivers, transmission impairments, and error rates; Introduction to information theory and coding: source coding, channel coding, channel capacity.

(0-3) Cr. 1.

Prereq: E E 321, enrollment in E E 422
Construction and evaluation of modulators, demodulators and other components for analog and digital communications. Design, simulate,and evaluate wireless communication systems and their key components. Noise measurement.

(3-3) Cr. 4.

Prereq: E E 224
Sampling and reconstruction. Concepts and mathematical tools in discrete-time signal processing with examples from digital signal processing and communications. Discrete-time correlation and matched-filter receivers. Discrete Fourier transform (DFT). Fast Fourier algorithms. Z transforms. Design of finite impulse response (FIR) and infinite impulse response (IIR) filters. Realizations of discrete-time systems and quantization effects. Multi-rate signal processing. Laboratory experiments illustrating DSP implementations and applications.

(Dual-listed with E E 532). (Cross-listed with MAT E). (2-4) Cr. 4.

Prereq: credit or enrollment in E E 332
Techniques used in modern integrated circuit fabrication, including diffusion, oxidation, ion implantation, lithography, evaporation, sputtering, chemical-vapor deposition, and etching. Process integration. Process evaluation and final device testing. Extensive laboratory exercises utilizing fabrication methods to build electronic devices. Use of computer simulation tools for predicting processing outcomes. Recent advances in processing CMOS ICs and micro-electro-mechanical systems (MEMS).

(Cross-listed with CPR E). (3-3) Cr. 4. S.

Prereq: E E 324, E E 330, E E 332, and either E E 322 or STAT 330
Basic analog integrated circuit and system design including design space exploration, performance enhancement strategies, operational amplifiers, references, integrated filters, and data converters.

(Dual-listed with E E 538). (3-0) Cr. 3.

Prereq: E E 311, E E 332
Transmission and reflection of electromagnetic plane waves. Propagation in dielectric and fiber optic waveguides. LED and laser operating principles and applications. Photodetectors and solar cells. Optical modulation and switching.

(3-0) Cr. 3. S.

Prereq: E E 332 or MAT E 334
Concepts of quantum mechanics relevant to nanoelectronic devices, including quantization, tunneling, and transport; overview of some of the leading technologies for nanoelectronics, including carbon nanotubes, quantum dots, and molecular transistors; fabrication methods for building nanoelectronic devices.

(3-2) Cr. 2. F.S.

Prereq: PHYS 222, MATH 267
Half-semester course. Basic circuit analysis using network theorems with time domain and Laplace transform techniques for resistive, resistive-inductive, resistive-capacitive, and resistive- inductive-capacitive circuits. Transient circuit behavior. Basic operational amplifiers and applications. Familiarization with common E E instrumentation and demonstration of basic principles. Credit for only 201 or 442 may be counted toward graduation; credit for 442 will not count toward graduation for E E or Cpr E majors.

(3-2) Cr. 2. F.S.

Prereq: E E 442
Half-semester course. Basics of DC machines, stepper motors, AC induction motors, and synchronous generators. AC steady state analysis, transformers, and three-phase circuit analysis.

(Cross-listed with B M E). (3-0) Cr. 3.

Prereq: B M E 220
Overview of biosensors and bioanalytical challenges; designing for performance including various analytical problems, ion-selective membranes, characteristics of enzymes and basics of bioaffinity sensing; fundamentals of bioselective layers including depositing films and membranes, surfaces for immobilization and bioselective agents; survey of different biosensing technologies including electroanalytical, biomembrane, optical, and acoustic-wave based sensors.

(Cross-listed with B M E). (0-3) Cr. 1.

Prereq: B M E 220, concurrent enrollment in B M E 450
Laboratory course accompanying B M E 450. Design, fabrication, and characterization of various electrical, chemical, polymer, optical and acoustic sensors.

(Cross-listed with E M, M E). (2-2) Cr. 3. Alt. S., offered even-numbered years.

Prereq: PHYS 221 and MATH 266 or MATH 267
Properties of sounds waves and noise metrics (pressure, power levels, etc). Sound sources and propagation. Principles of wave propagation in one-, two-, and three-dimensions. Wave reflection and transmission. Wave propagation in rectangular, cylindrical, and annular ducts. Acoustics fields for model noise sources. Introduction to aerodynamic noise sources in aircraft, aircraft engines, and wind turbines. Selected laboratory experiments.

(2-3) Cr. 3. S.

Prereq: E E 303, E E 324
Basic concepts of electromagnetic energy conversion. DC motors and three-phase induction motors. Basic introduction to power electronics. Adjustable speed drives used for control of DC, induction, and AC motors. Experiments with converter topologies, DC motors, AC motors and adjustable speed drives.

(3-0) Cr. 3. F.

Prereq: E E 303, credit or registration in E E 324
Overhead and underground distribution system descriptions and characteristics, load descriptions and characteristics, overhead line and underground cable models, distribution transformers, power flow and fault analysis, overcurrent protection, power factor correction, system planning and automation, and economics in a deregulated environment.

(3-0) Cr. 3. F.

Prereq: E E 303, credit or registration in E E 324
Power transmission lines and transformers, synchronous machine modeling, network analysis, power system representation, load flow.

(3-0) Cr. 3. S.

Prereq: E E 303, credit or registration in E E 324
Power system protection, symmetrical components, faults, stability. Power system operations including the new utility environment.

(Cross-listed with ECON). (3-0) Cr. 3.

Prereq: E E 303 or ECON 301
Evolution of electric power industry. Power system operation and planning and related information systems. Linear and integer optimization methods. Short-term electricity markets and locational marginal prices. Risk management and financial derivatives. Basics of public good economics. Cost recovery models including tax treatment for transmission investments.

(Dual-listed with E E 559). (3-0) Cr. 3.

Prereq: Credit or enrollment in E E 452, E E 456
Summary of industry status and expected growth; power extraction from the air stream; operation and modeling of electric machines, and power electronics topologies for wind energy conversion; analysis of machine-grid power electronic circuits, controller interface, and collector (distribution) networks; treatment of harmonics, flicker, over/under-voltages, filters, low-voltage ride-through, and reactive compensation; relaying; effects on transmission expansion, planning and grid operation and coordination including variability, frequency control, reserves, and electricity markets; overview of storage technologies and hybrid configurations.

(Cross-listed with CPR E). (3-3) Cr. 4. S.

Prereq: E E 330
Digital design of integrated circuits employing very large scale integration (VLSI) methodologies. Technology considerations in design. High level hardware design languages, CMOS logic design styles, area-energy-delay design space characterization, datapath blocks: arithmetic and memory, architectures and systems on a chip (SOC) considerations. VLSI chip hardware design project.

(Cross-listed with A B E, AER E, B M E, CPR E, ENGR, I E, M E, MAT E). (1-4) Cr. 3. Repeatable. F.S.

Prereq: Student must be within two semesters of graduation; permission of instructor.
Application of team design concepts to projects of a multidisciplinary nature. Concurrent treatment of design, manufacturing, and life cycle considerations. Application of design tools such as CAD, CAM, and FEM. Design methodologies, project scheduling, cost estimating, quality control, manufacturing processes. Development of a prototype and appropriate documentation in the form of written reports, oral presentations and computer models and engineering drawings.

(Cross-listed with AER E, CPR E, ENGR, I E, M E, MAT E). (1-4) Cr. 3. Repeatable, maximum of 2 times. Alt. F., offered irregularly.Alt. S., offered irregularly.

Prereq: Student must be within two semesters of graduation or receive permission of instructor.
Build and test of a conceptual design. Detail design, manufacturability, test criteria and procedures. Application of design tools such as CAD and CAM and manufacturing techniques such as rapid prototyping. Development and testing of a full-scale prototype with appropriate documentation in the form of design journals, written reports, oral presentations and computer models and engineering drawings.

(3-0) Cr. 3. F.

Prereq: E E 324
Stability and performance analysis of automatic control systems. The state space, root locus, and frequency response methods for control systems design. PID control and lead-lag compensation. Computer tools for control system analysis and design.

(2-3) Cr. 3. S.

Prereq: E E 475
Computer aided techniques for feedback control system design, simulation, and implementation.

(Dual-listed with E E 588). (Cross-listed with MAT E). (3-0) Cr. 3. Alt. F., offered odd-numbered years.

Prereq: MATH 265 and (MAT E 216 or MAT E 273 or E E 311 or PHYS 364)
Electromagnetic fields of various eddy current probes. Probe field interaction with conductors, cracks and other material defects. Ferromagnetic materials. Layered conductors. Elementary inversion of probe signals to characterize defects. Special techniques including remote-field, transient, potential drop nondestructive evaluation and the use of Hall sensors. Practical assignments using a 'virtual' eddy current instrument will demonstrate key concepts.

(Dual-listed with E E 589). (Cross-listed with GEOL, MTEOR, NREM). (3-0) Cr. 3. F.

Prereq: Four courses in physical or biological sciences or engineering
Electromagnetic-radiation principles, active and passive sensors, multispectral and hyperspectral sensors, imaging radar, SAR, thermal imaging, lidar. Examples of applications. Also offered online S.

(Dual-listed with E E 589L). (Cross-listed with GEOL, MTEOR, NREM). (0-3) Cr. 1. S.

Prereq: Completion or concurrent enrollment in MTEOR/GEOL/NREM/EE 489/589
Processing and analysis of satellite sensor data (optical and radar). Provides practical applications in an environmental context.

Cr. arr. Repeatable.

Prereq: Senior classification in electrical engineering
Investigation of an approved topic commensurate with the student's prerequisites.

Cr. arr.

Prereq: Senior classification in electrical engineering
Investigation of an approved topic commensurate with the student's prerequisites.

(Cross-listed with CPR E). (2-3) Cr. 3. F.S.

Prereq: E E 322 or CPR E 308, completion of 24 credits in the E E core professional program or 29 credits in the Cpr E core professional program, ENGL 314
Preparing for entry to the workplace. Selected professional topics. Use of technical writing skills in developing project plan and design report; design review presentation. First of two-semester team-oriented, project design and implementation experience.

(Cross-listed with CPR E). (1-3) Cr. 2. F.S.

Prereq: CPR E 491 or E E 491
Second semester of a team design project experience. Emphasis on the successful implementation and demonstration of the design completed in E E 491 or CPR E 491 and the evaluation of project results. Technical writing of final project report; oral presentation of project achievements; project poster.

(Cross-listed with CPR E). Cr. R.

Prereq: CPR E 394 or E E 394, credit or enrollment in CPR E 491 or E E 491
Portfolio update and evaluation. Portfolios as a tool to enhance career opportunities.

(Cross-listed with PHYS). (3-0) Cr. 3. S.

Prereq: Credit or enrollment in PHYS 322, PHYS 365, and PHYS 480
Review of wave and electromagnetic theory; topics selected from: reflection/refraction, interference, geometrical optics, Fourier analysis, dispersion, coherence, Fraunhofer and Fresnel diffraction, holography, quantum optics, nonlinear optics.

Courses primarily for graduate students, open to qualified undergraduates:

(Cross-listed with CPR E). (3-3) Cr. 4. F.

Prereq: E E 435
Design techniques for analog and mixed-signal VLSI circuits. Amplifiers; operational amplifiers, transconductance amplifiers, finite gain amplifiers and current amplifiers. Linear building blocks; differential amplifiers, current mirrors, references, cascading and buffering. Performance characterization of linear integrated circuits; offset, noise, sensitivity and stability. Layout considerations, simulation, yield and modeling for high-performance linear integrated circuits.

(Cross-listed with CPR E). (3-3) Cr. 4.

Prereq: E E 435, Credit or Registration for E E 501
Theory, design and applications of power management and regulation circuits (Linear and switching regulators, battery chargers, and reference circuits) including: Architectures, Performance metrics and characterization, Noise and stability analysis, Practical implementation and on-chip integration issues, design considerations for portable, wireless, and RF SoCs.

(Cross-listed with CPR E). (3-3) Cr. 4. Alt. S., offered even-numbered years.

Prereq: E E 501
Theory, design and applications of data conversion circuits (A/D and D/A converters) including: architectures, characterization, quantization effects, conversion algorithms, spectral performance, element matching, design for yield, and practical comparators, implementation issues.

(Cross-listed with CPR E). (3-3) Cr. 4.

Prereq: E E 435 or E E 501 or instructor approval
Analysis and design of phase-locked loops implemented in modern CMOS processes including: architectures, performance metrics, and characterization; noise and stability analysis; and design issues of phase-frequency detectors, charge pumps, loop filters (passive and active), voltage controlled oscillators, and frequency dividers.

(Cross-listed with CPR E). (3-3) Cr. 4. Alt. S., offered odd-numbered years.

Prereq: E E 435 or E E 501
Phase-locked loops, frequency synthesizers, clock and data recovery circuits, theory and implementation of adaptive filters, low-noise amplifiers, mixers, power amplifiers, transmitter and receiver architectures.

(3-3) Cr. 4.

Prereq: E E 501
Filter design concepts. Approximation and synthesis. Transformations. Continuous-time and discrete time filters. Discrete, active and integrated synthesis techniques.

(3-0) Cr. 3.

Prereq: E E 424 or equivalent and E E 435 or E E 501
Introduction to mixed-signal IC testing; measurement uncertainty and test validity; IEEE standard test algorithms; high performance test and built-in self test challenges; new mixed-signal test algorithms and techniques to reduce data acquisition to relax instrumentation requirements, to simplify test setup, to improve test validity, and/or to enable co-testing of heterogeneous functions.

Cr. 1-3. Repeatable.

Prereq: E E 311

(3-0) Cr. 3. S.

Prereq: E E 311
Propagation in optical media. Optical fibers. Optical sources and detectors. Fiber optic communications systems. DWDM considerations.

(3-0) Cr. 3. F.

Prereq: E E 311
Review of static electric and magnetic fields. Maxwell's equations. Circuit concepts and impedance elements. Propagation and reflection of plane waves in isotropic media. Guided electromagnetic wave. Characteristics of common waveguides and transmission lines. Propagation in anisotropic media. Special theorems and concepts. Radiation and scattering.

(3-0) Cr. 3. S.

Prereq: E E 512
Green's functions, perturbational and variational techniques. Analysis of microstrip lines and interconnects. Spectral domain approach, waves in layered media. Integral equations and method of moments. Inverse scattering. Electromagnetic applications.

(Dual-listed with E E 414). (3-3) Cr. 4. F.

Prereq: E E 230, E E 311
Principles, analyses, and instrumentation used in the microwave portion of the electromagnetic spectrum. Wave theory in relation to circuit parameters. S parameters, couplers, discontinuities, and microwave device equivalent circuits. RF amplifier design, microwave sources, optimum noise figure and maximum power designs. Microwave filters and oscillators.

(3-0) Cr. 3. S.

Prereq: E E 311
Maxwell's equations. Differential equation based methods. Finite difference and finite difference time domain methods, boundary conditions. Finite element method and applications to the analysis of practical devices. Integral equation based methods. Electric and magnetic field integral equations. Matrix solvers. Fast solution methods.

(Dual-listed with E E 417). (3-3) Cr. 4. S.

Prereq: E E 311
Fundamental antenna concepts. Radiation from wire-and aperture-type sources. Radio transmission formulas. Wave and antenna polarization. Antenna arrays. Modern antenna topics. Practical antenna design. Antenna noise. Radiowave propagation in the presence of the earth and its atmosphere. Antenna measurements and computer aided analysis.

(Cross-listed with AGRON, MTEOR). (3-0) Cr. 3. Alt. S., offered even-numbered years.

Prereq: MATH 265 or equivalent
Microwave remote sensing of Earth's surface and atmosphere using satellite-based or ground-based instruments. Specific examples include remote sensing of atmospheric temperature and water vapor, precipitation, ocean salinity, and soil moisture.

(Cross-listed with M S E). (3-0) Cr. 3. F.

Prereq: E E 311 or MAT E 317 or PHYS 364
Magnetic fields, flux density and magnetization. Magnetic materials, magnetic measurements. Magnetic properties of materials. Domains, domain walls, domain processes, magnetization curves and hysteresis. Types of magnetic order, magnetic phases and critical phenomena. Magnetic moments of electrons, theory of electron magnetism. Technological application, soft magnetic materials for electromagnets, hard magnetic materials, permanent magnets, magnetic recording technology, magnetic measurements of properties for materials evaluation.

(3-0) Cr. 3. F.

Prereq: E E 422, credit or enrollment in E E 523
Digital communication systems overview. Characterization of communication channels. Digital modulation and demodulation design and performance analysis. Channel capacity and error-control coding concepts. Waveform design for band-limited channels. Equalization. Wireless fading channels and performance.

(Cross-listed with CPR E). (3-0) Cr. 3. Alt. F., offered irregularly.

Prereq: Permission of instructor
Topics on cognitive radio networks: Cognitive Radio Networks Architecture; Software Defined Radio Architecture; Spectrum Sensing; Spectrum Management; Spectrum Sharing; Spectrum Mobility; Applications of Cognitive Radio Networks.

(3-0) Cr. 3.

Prereq: E E 322, MATH 317
Axioms of probability; Repeated trials; Functions of a random variable and multiple random variables: covariance matrix, conditional distribution, joint distribution, moments, and joint moment generating function; Mean square estimation; stochastic convergence; Some important stochastic processes: Random walk, Poisson, Wiener, and shot noise; Markov chaines; Power spectral analysis; Selected applications.

(3-0) Cr. 3. F.

Prereq: E E 322, E E 424, MATH 317
Review: sampling and reconstruction of signals; discrete-time signals, systems, and transforms. Multi-rate digital signal processing and introduction to filter banks. Optimal linear filtering and prediction. Introductions to adaptive filtering and spectral estimation. Applications.

(3-0) Cr. 3. S.

Prereq: E E 422
Statistical estimation theory and performance measures: maximum likelihood estimation, Cramer-Rao bound, Bayesian estimation, optimal demodulation, signal design. Introduction to graphical models. Hidden Markov models and Kalman filter. Classical statistical decision theory, decision criteria, binary and composite hypothesis tests. Error probability and Chernoff bound. Applications.

(3-0) Cr. 3. S.

Prereq: E E 322, E E 424
Review of sampling, linear algebra and probability. Classical image processing topics such as image sampling and quantization, image transforms (2D Fourier, KLT, DCT, etc), image enhancement, restoration and filtering. Image analysis topics including edge detection, segmentation, registration and tracking (uses least squares estimation, EM, Kalman filter). Medical image reconstruction from tomographic projections (Radon transform, Fourier slice theorem and reconstruction algorithms using them) and Magnetic Resonance Imaging (MRI). Basic introduction to image and video compression methods.

(Dual-listed with E E 432). (Cross-listed with M S E). (2-4) Cr. 4.

Prereq: credit or enrollment in E E 332
Techniques used in modern integrated circuit fabrication, including diffusion, oxidation, ion implantation, lithography, evaporation, sputtering, chemical-vapor deposition, and etching. Process integration. Process evaluation and final device testing. Extensive laboratory exercises utilizing fabrication methods to build electronic devices. Use of computer simulation tools for predicting processing outcomes. Recent advances in processing CMOS ICs and micro-electro-mechanical systems (MEMS).

(Cross-listed with PHYS). (3-3) Cr. 4.

Prereq: E E 311 and E E 332
Basic elements of quantum theory, Fermi statistics, motion of electrons in periodic structures, crystal structure, energy bands, equilibrium carrier concentration and doping, excess carriers and recombination, carrier transport at low and high fields, space charge limited current, photo-conductivity in solids, phonons, optical properties, amorphous semiconductors, heterostructures, and surface effects. Laboratory experiments on optical properties, carrier lifetimes, mobility, defect density, doping density, photo-conductivity, diffusion length of carriers.

(Cross-listed with PHYS). (3-0) Cr. 3.

Prereq: E E 535
P-n junctions, band-bending theory, tunneling phenomena, Schottky barriers, heterojunctions, bipolar transistors, field-effect transistors, negative-resistance devices and optoelectronic devices.

(Dual-listed with E E 438). (3-0) Cr. 3.

Prereq: E E 311, E E 332
Transmission and reflection of electromagnetic plane waves. Propagation in dielectric and fiber optic waveguides. LED and laser operating principles and applications. Photodetectors and solar cells. Optical modulation and switching.

(3-0) Cr. 3. F.

Prereq: E E 324
Mathematical formulation of pattern recognition problems and decision functions. Statistical approaches: Bayes classifier, probability density function estimation and expectation minimization. Clustering (supervised and unsupervised), learning, and neural network algorithms. Fuzzy recognition systems. Feature selection systems. Classifier comparison. Current applications.

(3-0) Cr. 3.

Prereq: E E 456, E E 457 or equivalent
Characteristics of bulk energy conversion, storage, and transport technologies. Environmental legislation. Modeling of electricity markets. Evaluation of sustainability and resiliency. Types of planning analyses: economic, multi-sector, long-term, national. Planning tools and associated optimization methods.

(3-0) Cr. 3. F.

Prereq: E E 456, E E 457
Power flow, economic dispatch, unit commitment, electricity markets, automatic generation control, sparse matrix techniques, interconnected operation, voltage control.

(3-0) Cr. 3. S.

Prereq: E E 456, E E 457, E E 475
Dynamic performance of power systems with emphasis on stability. Modeling of system components and control equipment. Analysis of the dynamic behavior of the system in response to small and large disturbances.

(3-0) Cr. 3.

Prereq: E E 455
Transient models of distribution components, automated system planning and distribution automation, surge protection, reliability, power quality, power electronics and intelligent systems applications.

(3-0) Cr. 3.

Prereq: E E 452
Converter topologies, AC/DC, DC/DC, DC/AC, AC/AC. Converter applications to do motor drives, power supplies, AC motor drives, power system utility applications (var compensators) and power quality.

(Dual-listed with E E 459). (3-0) Cr. 3.

Prereq: Credit or enrollment in E E 452, E E 456
Summary of industry status and expected growth; power extraction from the air stream; operation and modeling of electric machines, and power electronics topologies for wind energy conversion; analysis of machine-grid power electronic circuits, controller interface, and collector (distribution) networks; treatment of harmonics, flicker, over/under-voltages, filters, low-voltage ride-through, and reactive compensation; relaying; effects on transmission expansion, planning and grid operation and coordination including variability, frequency control, reserves, and electricity markets; overview of storage technologies and hybrid configurations.

(Cross-listed with AER E, I E). (3-0) Cr. 3.

Prereq: Coursework in basic statistics
Introduction to organized multidisciplinary approach to designing and developing systems. Concepts, principles, and practice of systems engineering as applied to large integrated systems. Life-cycle costing, scheduling, risk management, functional analysis, conceptual and detail design, test, evaluation and systems engineering planning and organization. Not available for degrees in industrial engineering.

(Cross-listed with AER E). (3-0) Cr. 3. S.

Prereq: E E 565
Avionics functions. Applications of systems engineering principles to avionics. Top down design of avionics systems. Automated design tools.

(3-0) Cr. 3.

Prereq: E E 475, E E 577
Selected topics in abstract algebra, linear algebra, real analysis, functional analysis, and optimization methods in electrical engineering.

(3-0) Cr. 3.


Introduction to convex optimization problems emerging in electrical engineering. Efficiently solving convex optimization problems with the use of interior point algorithms software. Review of linear algebra, convex functions, convex sets, convex optimization problems, duality, disciplined convex programming, applications to optimal filtering, estimation, control and resources allocations, sensor network, distributed systems.

(Cross-listed with AER E, M E). (3-0) Cr. 3. F.

Prereq: E E 324 or AER E 331 or M E 370 or M E 411 or MATH 341
Elementary notions of probability. Random processes. Autocorrelation and spectral functions. Estimation of spectrum from finite data. Response of linear systems to random inputs. Discrete and continuous Kalman filter theory and applications. Smoothing and prediction. Linearization of nonlinear dynamics.

(Cross-listed with AER E, M E). (3-0) Cr. 3. S.

Prereq: E E 577
The optimal control problem. Variational approach. Pontryagin's principle, Hamilton-Jacobi equation. Dynamic programming. Time-optimal, minimum fuel, minimum energy control systems. The regulator problem. Structures and properties of optimal controls.

(Cross-listed with AER E, M E). (3-0) Cr. 3.

Prereq: E E 577
Introduction to modern robust control. Model and signal uncertainty in control systems. Uncertainty description. Stability and performance robustness to uncertainty. Solutions to the H2, Hoo, and l1 control problems. Tools for robustness analysis and synthesis.

(Cross-listed with AER E, M E). (3-0) Cr. 3. F.

Prereq: E E 475 or AER E 432 or M E 411 or MATH 415; and MATH 267
Sampled data, discrete data, and the z-transform. Design of digital control systems using transform methods: root locus, frequency response and direct design methods. Design using state-space methods. Controllability, observability, pole placement, state estimators. Digital filters in control systems. Microcomputer implementation of digital filters. Finite wordlength effects. Linear quadratic optimal control in digital control systems. Simulation of digital control systems.

(Cross-listed with AER E, M E, MATH). (3-0) Cr. 3. F.

Prereq: E E 324 or AER E 331 or MATH 415; and MATH 207
Linear algebra review. Least square method and singular value decomposition. State space modeling of linear continuous-time systems. Solution of linear systems. Controllability and observability. Canonical description of linear equations. Stability of linear systems. State feedback and pole placements. Observer design for linear systems.

(Cross-listed with AER E, M E, MATH). (3-0) Cr. 3. S.

Prereq: E E 577
Linear vs nonlinear systems. Phase plane analysis. Bifurcation and center manifold theory. Lyapunov stability. Absolute stability of feedback systems. Input-output stability. Passivity theory and feedback linearization. Nonlinear control design techniques.

(Dual-listed with E E 488). (Cross-listed with M S E). (3-0) Cr. 3. Alt. F., offered odd-numbered years.

Prereq: MATH 265 and (MAT E 216 or MAT E 273 or E E 311 or PHYS 364)
Electromagnetic fields of various eddy current probes. Probe field interaction with conductors, cracks and other material defects. Ferromagnetic materials. Layered conductors. Elementary inversion of probe signals to characterize defects. Special techniques including remote-field, transient, potential drop nondestructive evaluation and the use of Hall sensors. Practical assignments using a 'virtual' eddy current instrument will demonstrate key concepts.

(Dual-listed with E E 489). (Cross-listed with GEOL, MTEOR, NREM). (3-0) Cr. 3. F.

Prereq: Four courses in physical or biological sciences or engineering
Electromagnetic-radiation principles, active and passive sensors, multispectral and hyperspectral sensors, imaging radar, SAR, thermal imaging, lidar. Examples of applications. Also offered online S.

(Dual-listed with E E 489L). (Cross-listed with MTEOR, NREM). (0-3) Cr. 1. S.

Prereq: Completion or concurrent enrollment in MTEOR/GEOL/NREM/EE 489/589
Processing and analysis of satellite sensor data (optical and radar). Provides practical applications in an environmental context.

Cr. 1-6. Repeatable.


Formulation and solution of theoretical or practical problems in electrical engineering.

Cr. 1-6. Repeatable.


Formulation and solution of theoretical or practical problems in electrical engineering.

Cr. 1-6. Repeatable.


Formulation and solution of theoretical or practical problems in electrical engineering.

Cr. 1-6. Repeatable.


Formulation and solution of theoretical or practical problems in electrical engineering.

Cr. 1-6. Repeatable.


Formulation and solution of theoretical or practical problems in electrical engineering.

Cr. 1-6. Repeatable.


Formulation and solution of theoretical or practical problems in electrical engineering.

Cr. 1-6. Repeatable.


Formulation and solution of theoretical or practical problems in electrical engineering.

Cr. 1-6. Repeatable.


Formulation and solution of theoretical or practical problems in electrical engineering.

Cr. 1-6. Repeatable.


Formulation and solution of theoretical or practical problems in electrical engineering.

Cr. 1. Repeatable.


Offered on a satisfactory-fail basis only.

Cr. arr. Repeatable.


Courses for graduate students:

(3-0) Cr. 3.

Prereq: E E 521
Fundamentals of error-control coding techniques: coding gain, linear block codes. Galois fields. Cyclic codes: BCH, Reed-Solomon. Convolutional codes and the Viterbi algorithm. Trellis-coded modulation. Iterative decoding. Recent developments in coding theory.

(3-0) Cr. 3.

Prereq: E E 521, E E 523
Information system overview. Entropy and mutual information. Data Compression and source encoding. Discrete memoryless channel capacity. Noisy channel coding theorem. Rate distortion theory. Waveform channels. Advanced topics in information theory.

(3-0) Cr. 3. Repeatable.

Prereq: Permission of instructor
Advanced topics of current interest in electric power system engineering.

(3-0) Cr. 3. Repeatable.

Prereq: Permission of instructor
Advanced topics of current interest in the areas of control theory, stochastic processes, digital signal processing, and image processing.

(Cross-listed with CPR E). Cr. R. Repeatable.


One semester and one summer maximum per academic year professional work period. Offered on a satisfactory-fail basis only.

Cr. arr. Repeatable.